PDQ GP Series Lever Lock - Grade 2
PDQ GP LOCK DETAILS:
Lockset will be GP Series SPIRIT from PDQ Industries, Inc. Leola, Pennsylvania, assembled in the USA meeting the requirements of the Buy American Act with a five year manufacturer's limited warranty, and be certified to ANSI/BHMA A156.2-1996, Series 4000, Grade 2.
Windstorm Resistant Product Listing - ANSI A250.13-2003, ASTM E1886-02, ASTM E330-02. Outswing: 350 ft-lbs., Inswing: N/R, Design Load Rating: 685 lbf. Locksets shall be listed by UL / ULC for ratings of “A” label (3 hours) and less, UL10C / UBC 7-2 (1997) positive pressure, for single doors up to 4’0” x 8’0”.
Levers to be solid cast, with no plastic inserts, minimum 5-1/2" in overall length with supportive spring power totally independent of chassis or latch unit. Lockset to be fully adjustable for 1-3/8" to 1-3/4" doors.
Positive lever stop is to be totally independent of chassis or latch mechanism. Lockset fasteners to be concealed with the through-the-door through-bolt attachment outside the 2-1/8" door prep, exceeds 1600 in lbs. of torque resistance.
PDQ GP LOCK SPECS:
|
FOR DOORS:
|
1-3/8" to 1-3/4" thick. Factory adjusted for 1-3/4" |
|
DOOR PREP:
|
Fits standard 161 door prep. Through-door thru bolting. |
|
BACKSET:
|
2-3/4" (call MDI at 888.634.3667 for optional backsets: 2-3/8", 5"). |
|
CASE:
|
Heavy gauge cold-rolled steel mechanism. Chromate plate. |
|
FRONT:
|
2-1/4" X 1-1/8" Beveled 1/8" on 2". |
|
ROSE:
|
3-3/8" diameter. |
|
STRIKE:
|
4-7/8" X 1-1/4" (ASA). "T" or "FL" Strike optional. Stainless steel, wrought brass, or wrought bronze. |
|
LATCHBOLT:
|
1/2" throw. Adjustable front for flat or beveled doors. |
|
HAND:
|
Non-handed. |
|
TRIM:
|
PHL or BSN levers are solid zinc die cast. Wrought brass roses. Concealed screws. 65 degrees lever rotation. |
|
KEYS:
|
Two (2) change keys per lock. |
|
KEYWAYS:
|
Standard C-keyway. Check with MDI at 888.634.3667 for optional keyways. |
|
INTERCHANGEABLE CORE:
|
Available
for all keyed functions / 6 or 7-pin / Compatible with Best, Falcon and
Arrow / Large |
|
CYLINDER:
|
Brass 6-pin cylinder keyed to 5-pins. |
|
KEYING:
|
KD: Keyed Different; KD x MK: Keyed Different x Master Keyed. |
|
U.L. LISTED:
|
U.L., U.L.C. listed for “A” label (3 hour) single swing doors (4' x 8') / UL 10C / UBC 7-2 (1997) positive pressure, for single doors up to 4’0” x 8’0” |
|
CERTIFICATIONS:
|
ANSI A156.2, Series 4000, Grade 2. Meets all accessibility requirements of the ADA. U.L. Listed. |
|
WARRANTY:
|
Five-year limited warranty for all functions |
|
COUNTRY OF ORIGIN:
|
Assembled in the USA using US and Foreign material. This product meets the requirements of the Buy American Act.
|
Enter your e-mail address below:
Copyright © 2009-2011 MDI Supply. All Rights Reserved.
® MDI is a Registered Trademark of Metropolitan Door Industries Corp. and is used under license.
Powered by MDI Supply & Yahoo Secure Shopping
