Bradley # 961 Baby Changing Station

The 961 Series Baby Changing Station by Bradley has been discontinued Completely by Bradley.

Click here for Tech Data Sheet on Bradley Baby Changing Stations

Bradley Baby Changing Station Features:
»  Surface-Mounted
»  ADA compliant – opens with less than 5 lbs. of force, projects less than 4" from the wall when closed.  Consult local and national accessibility codes for proper installation guidelines.

»  Model 961 – Grey and White Speckled  ***DISCONTINUED***
»  Model 9611 - – Solid Light Grey ***DISCONTINUED***
»  Model 9612 – Ivory ***DISCONTINUED***

»  Overall dimensions:  34 1⁄16"W x 25" H x 31 5⁄16" D

OPTIONS:
»  1-Case of liners.  There are 500 liners per case.  Liners are 100% bio-degradable.

Product Materials
Molded bacterial-resistant, high density polyethylene with full-length, steel hinge pin. Concealed gas shock assists opening and closing; eliminates pinch points. Graphics in English and Spanish permanently molded in. Integrated dual paper liner dispenser and molded-in purse/diaper bag hooks. Safety strap with 100% unbreakable buckle.

STRENGTH NOTE:
Unit complies with ASTM F2285 Standard that requires commercial diaper changing stations be able to support a static load of up to 100 lbs.

Installation:
Verify all rough-in dimensions prior to installation. Secure to wall through mounting holes located on 16" or 24" centers. Mounting hardware for typical conditions is included.

WARNING:
Be sure to use reinforced backing behind wall where mounting screws or anchoring devices are installed to ensure adequate support for the baby changing station. All anchoring devices must be appropriate for specific wall construction. Severe personal injury and/or property damage may result from improper mounting.

Guide Specification:
Surface-mounted baby changing station shall be grey and white speckled (961), solid light grey (9611) or ivory colored (9612) molded bacterial-resistant, high density polyethylene. Hinge shall have full-length steel hinge pin and concealed gas shock. Unit shall include dual integrated paper liner dispensers, molded-in graphics, integral bag hook, and safety strap with unbreakable buckle. Unit shall be operable with less than 5 lbs. of force and complies with ASTM F2285 Standard.