
Design Hardware Grade 1 Heavy Duty Z75 Passage Lever Set
Grade 1 commercial, heavy duty passage lever set, Z-75
Design Hardware Z-Series Passage function lever set is a grade 1 heavy duty lever set.
Passage function: Latchbolt is operated by lever from either side and all times. Both levers are always unlocked at all times. For buildings or openings with high traffic use.
Click here for a cut sheet on the Design Hardware Z-Series Grade 1 Leverset.
Details and product specs of the Design Hardware Z-Series Lever Set:
Base Material: | Steel,
Zinc dichromated chassis for Corrosion Resistance |
ANSI | Meets
& Exceeds ANSI - A156.2, Series 4000, Grade 1 Standards |
UL Listed: | UL
Listed for "A" Label 3 Hour Fire Doors |
ADA: | Meets
ADA and ANSI A117.1 accessibility codes |
Levers: | 5"
Solid zinc die cast levers, 3 1/2" wrought brass roses |
Clutch: | Clutching
levers standard for Vandal resistance on locking functions |
Cycle Testing: | Tested
to over 2 Million Cycles |
Backset: | 2
3/4" backset with 1 1/8" x 2 1/4" latch face |
Latch Face: | 1"
x 2 1/4" latch face both with self adjusting front for square or
beveled edge doors |
Lever Springs: | Independent
lever return springs to prevent lever sag |
Strike Plate: | 4 7/8" x 1 1/4" ASA standard. |
Door Thickness: | Factory
Set for 1 3/4" thick doors - can be adjusted to fit 1 3/8" to
2" thick doors |
Door Prep: | Door
Prep: ANSI A115.2 - 2 1/8" cross bore with (2) 5/16" Thru bolt
holes |
Latch Bolt: | Stainless
Steel Latch bolt with 1/2" projection, Deadlocking on keyed
functions |
Cylinder: | Not
Applicable. See keyed functions for cylinder specs.
|
Lever Styles: | Flat,
Curved & Half Curved |
Handing: | Non-Handed
- Completely reversible |
Keys: | Not Applicable. See keyed functions for cylinder specs. |
Finish: | US26D/626 = Satin/Brushed Chrome |
Fasteners: | Combination
screws for wood or metal doors & frames |
Warranty: | Factory
Limited Lifetime Warranty |
Mfg Model #: | Z-75 |
MDI Supply Item #: | DH-Z-75-PASS |