Drop Plate for the Design Hardware Heavy Duty Door Closer
Regular and Parallel Drop Plates *
* Door closer sold separately. Click here for link to the 416 door closer.
Click here for spec sheet on the Regular Drop Plate for the 416 closer
Click here for installation instructions on the Drop Plates for the 416 closer
Click here for spec sheet on the Parallel Drop Plate for the 416 closer
* Please note that this product is special order and is not returnable *
"Regular Type" Drop Plate for the Design Hardware 416 Closer
|
Base Material: |
Steel |
|
Size: |
3 9/16" height x 12 3/8" width x 1/4" thickness |
|
Prepared Holes: |
Screw holes drilled & tapped for closer mounting & countersunk for installation to frame or door |
|
Application |
Used for regular arm mounting when the top rail is too narrow to allow the closer to be mounted directly to the door surface |
|
Minimum Top Rail: |
2" minimum top rail required |
|
Handing: |
Non-Handed |
| Finishes Available: | Painted Finishes: AL-Aluminum; BZ-Bronze (dark brown) |
| Fasteners: | Machine, Wood and Self Tapping machine screws |
| Warranty: | Limited Lifetime Warranty |
"Parallel Type" Drop Plate for the Design Hardware 416 Closer
|
Base Material: |
Steel |
|
Size: |
5" height x 12 3/8" width x 1/4" thickness |
|
Prepared Holes: |
Screw holes drilled & tapped for closer mounting & countersunk for installation to frame or door |
|
Application |
Used for parallel arm mounting where top rail is less than 5 1/2" measured from the stop |
|
Minimum Top Rail: |
2" minimum top rail required |
|
Handing: |
Non-Handed |
| Finishes Available: | Painted Finishes: AL-Aluminum; BZ-Bronze (dark brown) |
| Fasteners: | Machine, Wood and Self Tapping machine screws |
| Warranty: | Limited Lifetime Warranty |
Like Us
Follow Us
Google Review Us
YouTube Us