Pemko 18062 Brush Door Sweep, Surface Applied

Description

Pemko 18062 Brush Door Sweep - Surface Applied

Click here for product cut sheet

Brush gasketing products consist of dense type 6 nylon bristles. These gasketing products will conform to irregular surfaces making it an excellent product to seal almost any opening using a minimal closing force.

Brush Door Sweeps are designed to seal the gap between the bottom of the door and the top of the threshold or floor surface. They are usually supplied with a flat flange. The flat flange provides the best contact between the brush and the threshold or floor surface.

>	All brush seals consist of densely compressed nylon filaments encased in high quality aluminum retainers. These products are ideally suited for hollow metal and wood door (in-door sweep, jamb/header gasketing, and split astragal) applications. Also use Pemko undefineds brush weather-stripping products on overhead doors, sectional doors, sliding doors, and automatic doors.
>	All brush seals greatly reduce the infiltration of light, air, wind, rain, and snow; prevent heat loss; control the penetration of smoke and fumes.
>	The dense nylon filaments conform to the contours of every sealing surface, providing a superior seal with extremely low closing force.
>	Brush remains flexible down to -40 Degrees F and has a melting point above 400 Degrees F.
>	Nylon brush insert is designated by a undefinedNBundefined following the finish code.
>	All brush seals come with #6 x 5/8" stainless steel sheet metal screws.
>	Punched with slotted holes for adjustment

* This product can be field-cut by installer to fit odd size door.

SPECS:
> WIDTH: 1/4" (6.4 mm)
> PROFILE HEIGHT: 7/8" (22.2 mm)
> HEIGHT INCLUDING BRUSH: 1-1/2" (38.1 mm)

MODELS:
18062CNB: C - Clear Anodized Aluminum with Gray Nylon Brush insert
18062DNB: D - Dark Bronze Anodized Aluminum with Black Nylon Brush insert