EXPB Series expansion bolt sleeve anchor
3/8" x 6" Combo Flat Phillips Expansion Bolt Sleeve Anchors, Zinc Plated.
|MDI Item #||EXPB|
3/8" x 6"
3/8" x 5"
|Head:||Combo Flat Phillips|
|Min. Ship Qty.||6 Each|
|Usually Ships||Within 1-business day|
* This product has a minimum purchase of six (6) each
The EXPB expansion bolt is a pre-assembled single unit sleeve anchor available in carbon steel and is versatile which can be used in concrete, masonry, grout-filled block, brick, and stone. Anchors should be installed with carbide tipped drill bits.
|1.||Drill hole depth 1/2" to 1" deeper than anchor embedment. Select a carbide-tip drill bit with same nominal diameter as anchor body.|
|2.||Clean hole of debris.|
|3.||Set nut flush with top of anchor and drive anchor through material to be anchored into work surface until nut and washer are snug with material to be attached.|
|4.||Tighten nut until finger tight, then turn 3 to 4 full turns to set the expansion sleeve.|
GENERAL APPLICATIONS AND USES
» Door and Window Frame Installations • Shelving and Storage
» Mounting fixtures on walls • Masonry Applications
» Mounting of Handrails and Fencing • Electrical and Mechanical Attachments
FEATURES AND BENEFITS
» Multiple head styles for multiple applications and finished appearance
» Fits standard fixture holes – No need to undersize anchors for proper fit
» Immediate Loading – Minimizes downtime
» Sleeve has 360° contact area and reduces concrete stress
» Versatile and ideal for concrete, brick and block
» Available in carbon steel and Type 304 stainless steel.*
* Contact our customer service department at 888.634.3667 for stainless steel expansion bolt anchors.