' rel='stylesheet' type='text/css'>
Anemostat HM Clip
Hollow Metal door clips can be used in hollow metal doors, and replace the need for a reinforcing channel in all Anemostat vision frames and louvers when fitted to 1 3/4" (44mm) thick doors. They are manufactured from 20GA cold rolled steel. The clip is inserted between the door skins and then snapped into place, fitting flush with the door cut-out. The number of clips required will depend on the size of the cut-out. Please note that when using HM Clips with LoPro vision frames extra caution should be taken to ensure door cut-out is exact. Do not oversize the cut-out!
HM Clip can be used in fire rated and non-fire rated 1 3/4" thick HM doors.
Details and product specs of the Anemostat HM Clip:
|Material:||20 Ga (1mm) Cold Rolled Steel|
|Door Thickness:||For 1 3/4 HM doors only.|
|Latchbolt:||3/4" throw, stainless steel one-piece anti-friction.|
|Fire Rating:||UL and WHI (The clip is stamp labeled with both the UL and WHI labels). 20/45/60/90 minutes listing approval from Underwriters Laboratory and Warnock Hersey for use on all Anemostat Vision Frames and the FLDL-UL Louver.|
|Purpose:||Prevents hollow metal door from collapsing when core burns away during a fire. Replaces the need for reinforcing channel in all Anemostat Vision Frames and the FLDL-UL fusible link louver.|
HM-CLIP adds stregnth and rigidity to a cut-out in a 1 3/4" HM door when properly installed.
For Lites over 100 sq.in. visible lite.
- Two HM-Clips required on cutout sides over 60" (1524mm), equally spaced in side (minimum U.L. requirements).
Put long bent side of clip between door skins, then snap into place, fitting flush with the door cutout.
|Mfg Model #:||HM-CLIP|
|MDI Supply Item #:||ANEMO-HM-CLIP|
|Packaged & Sold:||10-Each per Bag. Larger orders may be bulk packaged (bag or box).|